|Place of Origin:||China|
|Minimum Order Quantity:||50 Pieces|
|Packaging Details:||In well protected carton or wooden box with pallets. 26pcs per pallet, 380pcs fill into 20GP, 820pcs fill into 40HQ|
|Delivery Time:||Shipped in 7 days after payment|
|Payment Terms:||T/T、L/C、West Union|
|Supply Ability:||5000000 Watt/Watts per Month|
|Glass:||White Tempered Glass||Power:||260-360W|
Discount Monocrystalline Polycrystalline Solar System Solar Panel Solar Cell
|300W-340W SolarPANEL ELECTRICAL CHARACTERISTICS|
|Minimum performance at stc1|
|Maximum Power Voltage(V)||37.04||37.15||37.21||37.31||37.37||37.42|
|Maximum Power Current(A)||8.64||8.75||8.87||8.98||9.1||9.22|
|Open Circuit Voltage(V)||45.8||45.98||46.15||46.26||46.35||46.44|
|Short Circuit Current(A)||9.25||9.32||9.43||9.53||9.61||9.69|
|Solar Panel Efficiency||16.42%||16.68||16.93||17.19||17.45||17.70%|
|Standard Test Condition||Irradiance 1000W/M2, Cell Temperature 25ºC, Air Mass 1.5|
|NOCT(Nominal Operating Cell Temperature)||44°C (±2°C)|
|Temperature Coefficient of Pmax||-0.39%/°C|
|Temperature Coefficient of Voc||-0.29%/°C|
|Temperature Coefficient of Lsc||+0.05%/°C|
|Maximum Systerm Voltage||1000VDC|
|Max Series Fuse Rating||15A|
|Number of Cells(Pcs)||72(6x12)|
|Frame||Anodized Aluminium Alloy|
|Glass||3.2mm, High Transmission, Low Iron, Tempered Glass|
|Output cable||Section Size: 4mm² , Length: 1000mm|
|No. of Bypass Diodes||3&6|
|Warranty||10 Years Warrange For The 90% Module Efficiency
20 Years Warrange For The 80% Module Efficiency
Cleaning & Texturing: Wafers are cleaned with industrial soaps and form square-based pyramids also called texture. The texturization helps to reduce the reflection of sunlight.
Diffusion: Wafers that have been pre-droped with boron during the casting process are then given a negative(n-type) surface characteristic by diffusing them with a phosphorus source at high temperature, which in turn creats the negative/positive(n-p) junction.
Etching: Phosphorus diffuses not only into the desired wafer surface but also into the side and the opposite surface to form PN. This gives a shunt path between the cell front and rear. Removal of the path around the wafer edge/edge junction isolation is named etching.
PECVD: By PECVD equipment, the wafers are coated with anti-reflection coating(ARC). It's the blue silicion nitride film to reduce reflection and promote absorption of light.
Printing & Heating: it was adopted by printing paste with screen technology to print the electrodes of silicion solar, and form a good ohmic contact.
Testing & Sorting: It means classifying the cells according to their efficiency tested under the simulated sunlight.