Rohit Raj HasijaWe have taken Solar Panels from Junhui in china, and the commitment way to solve problem with such detailed info of Junhui team is really appreciable.
Muhammad AtifI really appreciate the way you people supply high quality solar panels with a good price. Good service to customer. And very fast.
Blue Monocrystalline And Polycrystalline Solar Panel / Solar Power System
|Place of Origin||China|
|Minimum Order Quantity||50 Pieces|
|Packaging Details||In well protected carton or wooden box with pallets. 26pcs per pallet, 380pcs fill into 20GP, 820pcs fill into 40HQ|
|Delivery Time||Shipped in 7 days after payment|
|Payment Terms||T/T、L/C、West Union|
|Supply Ability||5000000 Watt/Watts per Month|
|Glass||White Tempered Glass||Power||260-360W|
multicrystalline solar panels,
polycrystalline solar panel
Discount Monocrystalline Polycrystalline Solar System Solar Panel Solar Cell
|300W-340W SolarPANEL ELECTRICAL CHARACTERISTICS|
|Minimum performance at stc1|
|Maximum Power Voltage(V)||37.04||37.15||37.21||37.31||37.37||37.42|
|Maximum Power Current(A)||8.64||8.75||8.87||8.98||9.1||9.22|
|Open Circuit Voltage(V)||45.8||45.98||46.15||46.26||46.35||46.44|
|Short Circuit Current(A)||9.25||9.32||9.43||9.53||9.61||9.69|
|Solar Panel Efficiency||16.42%||16.68||16.93||17.19||17.45||17.70%|
|Standard Test Condition||Irradiance 1000W/M2, Cell Temperature 25ºC, Air Mass 1.5|
|NOCT(Nominal Operating Cell Temperature)||44°C (±2°C)|
|Temperature Coefficient of Pmax||-0.39%/°C|
|Temperature Coefficient of Voc||-0.29%/°C|
|Temperature Coefficient of Lsc||+0.05%/°C|
|Maximum Systerm Voltage||1000VDC|
|Max Series Fuse Rating||15A|
|Number of Cells(Pcs)||72(6x12)|
|Frame||Anodized Aluminium Alloy|
|Glass||3.2mm, High Transmission, Low Iron, Tempered Glass|
|Output cable||Section Size: 4mm² , Length: 1000mm|
|No. of Bypass Diodes||3&6|
|Warranty||10 Years Warrange For The 90% Module Efficiency
20 Years Warrange For The 80% Module Efficiency
Flagsun's manufacturing covers the photovoltaic value chain from ingot casting and wafering through solar cell production and solar panel assembly.All the cell is with most strict quality standard in every production process .
1.High conversion efficiency resulting in superior power output performance.
2.Outstanding power output even in low light or high temperature conditions
3.Optimized design for ease of soldering and lamination
4.Long-term stability,reliability and performance
5.Output power tolerance of +/-3%
Front:Silver bus bars;Dark blue/others silicon nitride anti reflection coating
Back:Silver/aluminum bus bars;Full-surface aluminum BSF
Typical package for one box is 1200 cells. These cells are sealed in paper boards every 100 pcs.
Gross weight per unit shall be around 15 kg.
Cleaning & Texturing: Wafers are cleaned with industrial soaps and form square-based pyramids also called texture. The texturization helps to reduce the reflection of sunlight.
Diffusion: Wafers that have been pre-droped with boron during the casting process are then given a negative(n-type) surface characteristic by diffusing them with a phosphorus source at high temperature, which in turn creats the negative/positive(n-p) junction.
Etching: Phosphorus diffuses not only into the desired wafer surface but also into the side and the opposite surface to form PN. This gives a shunt path between the cell front and rear. Removal of the path around the wafer edge/edge junction isolation is named etching.
PECVD: By PECVD equipment, the wafers are coated with anti-reflection coating(ARC). It's the blue silicion nitride film to reduce reflection and promote absorption of light.
Printing & Heating: it was adopted by printing paste with screen technology to print the electrodes of silicion solar, and form a good ohmic contact.
Testing & Sorting: It means classifying the cells according to their efficiency tested under the simulated sunlight.